Freeride E-XC 2020
: 10.999,00 EUR
Ergonomics & Comfort
The KTM FREERIDE E-XC shares its ergonomics with the FREERIDE 250 F, meaning it has all the same usability and comfort needed for a day out on the trails.
Shaped for control
…The tapered Neken high-strength aluminum handlebar of the KTM FREERIDE E-XC has the same bend and width as the EXC handlebar, providing the rider with enhanced ergonomics and control. The handlebar is equipped with ODI grips, with a convenient lock-on grip on the left, which requires neither adhesives nor wire for a secure fit.WWWWWWWW…
…High-strength nylon strap Indispensable for use on extreme terrain Attaches to fork tube WW…
Renthal Twinwall handlebar
…The Renthal Twinwall 999, in KTM orange design, combines two handlebars in one: An exterior guarantees maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding. Dimensions: A = 79 mm, B = 811 mm, C = 74 mm WW…
Freedom to move
…Offering unrestricted freedom of movement, combined with excellent comfort, the long, narrow seat of the KTM FREERIDE E-XC is easily unlocked and unlatched for access to the KTM PowerPack. At a seat height of just over 900 mm, ground contact is within reach of most riders, even in difficult terrain, which increases confidence and gives the rider a greater feeling of safety, which is particularly good for beginners. The KTM PowerParts range of high quality accessories includes an alternative seat with even lower seat height.WWWWWWWW…
Strength and adjustability
…Lightweight, wide cast footpegs provide safe contact on the KTM FREERIDE E-XC. The footpegs feature eccentric brackets that can be rotated by 180 degrees for a position offset 8 mm to the rear. This seemingly minute adjustment serves to shift the balance to provide handling either towards increased traction (rear) or easier cornering, respectively, as required.WWWWWWWW…
…Ingenious: Foot pegs that move with you when you shift your weight. Ideal for Motocross, Enduro and Supermoto. The benefits: Spring-mounted, 20-degree rotational movement possible towards front and rear More control and grip in the corners thanks to the maneuverability Large tread surface of 60 mm Simpler and quicker weight shifting Simpler gear changing and braking Permanent contact between boot and foot peg: extends the service life of your boots! WW…
The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that mistakes, printing, setting and typing errors may occur; such information is subject to change without notice. No rights may be derived from incorrect statements.