KTM 250 SX-F 2020

: 9.549,00 EUR

Overview Engine & Exhaust Chassis Ergonomics & Comfort Bodywork & Graphics Software & Electronics

Engine & Exhaust

4-strokes have taken motocross to unthinkable new extremes in a playground where KTM is a dominant force. Lighter and more compact than ever thought possible, these well-balanced engineering masterpieces deliver class-leading power in the most dynamic way. Straight from the showroom floor, KTM 4-strokes offer READY TO RACE performance of the highest caliber.

Engine

Unrivalled power

…Renowned as the strongest engine in MX2 competition, the 2020 version maintains its dominance. Its compact structure contributes to excellent mass centralization, which supports the easy ride-ability of the bike. The 2020 model features a the new, stronger oil pump intermediate gear that, along with several other small, but important refinements, contributes to improved reliabiity. The low weight of only 25.9 kg, in combination with the compact engine layout and unrivalled power, once again makes the KTM 250 SX-F a real force to be reckoned with, yet still easy to ride for both amateur and professional riders.

Cylinder head

…

Crankshaft

…The KTM 250 SX-F has a rigid crankshaft and a connecting rod that features a plain big end bearing with two force-fitted bearing shells run directly on the crank pin. This design was essential for the extremely high engine speeds and unrivalled maximum power of the 250 cc 4-stroke engine. The design also enhances the engine's durability, allowing long crankshaft service intervals, which is a huge benefit in relation to time, effort and cost.

Crankcases and engine covers

…The compact engine cases are manufactured using a high pressure die-cast production process that helps with weight reduction, while retaining strength and durability. The design allows for optimal shaft arrangements close to the center of gravity, resulting in ideal mass centralization and easier ride-ability. The engine covers feature a smart surface structure that reduces wear caused by the rider's boots, keeping them looking as fresh as the day you bought it.

Engine

87,60 EUR

Skid plate

…This generation of KTM aluminum skid plates offers the most effective protection for frame and engine: Decoupled from the frame with rubber padding Exceptionally robust rear fastening clamp Made of 4 mm strong, high-tensile, robust aluminum Extremely durable and endurance-tested for the toughest off-road use Custom design - specifically developed for KTM models Highest grade quality workmanship Simple and quick assembly

POWERPART

54,12 EUR

Clutch slave cylinder protection

…

POWERPART

54,12 EUR

Clutch cover protection

…

POWERPART

Cooling

Effective heat control

…Maintaining the optimal engine temperature is crucial to ensuring consistent horsepower throughout the ride. The KTM 250 SX-F features radiators which are positioned for a lower the center of gravity. Their design matches the shrouds perfectly and offers a great slim feel to the ergonomics. By using CFD technology (computational fluid dynamics) together with a clever coolant circuit routing, the innovative system ensures the optimum engine temperature for the highest performance, no matter what the conditions. The radiators also feature special protectors that don't only serve as protection from flying rocks and debris but also as a brace that disperses energy around the radiators in the event of an impact.

Cooling

38,40 EUR

Water pump cover protection

…

POWERPART

49,14 EUR

Radiator protection

…

POWERPART

250,86 EUR

Radiator fan

…Indispensable in extreme conditions, this fan ensures more air, better cooling and maximum performance. It's in your own hands: The digital control allows you to adjust the switch-on temperature to the present conditions and to read off the current temperature at any time. The switch-on temperature can be set anywhere between 65°C and 95°C. The switch-off temperature is set automatically, and is always 1°C below the switch-on temperature.For installation on all models, you will need the auxiliary wiring harness 77711979000; for additional switching, the Y-distributor 77711979044 can also be installed.

POWERPART

Exhaust

Tuned for power

…When it comes to power delivery and performance, the exhaust on all 4-stroke models plays a key role and packs a punch that is hard to beat. It features a model specific header pipe with an advanced resonator called FDH (Flow Design Header), which is a small chamber around the pipe. The design allows the exhaust to be disassembled without removing the shock absorber and also provides better access to the shock. The aluminum sleeve, end cap and internal design of the silencer allows for slimmer ergonomics, making the bike feel narrower, without compromise to regulatory noise limits.

Exhaust

1.277,76 EUR

Akrapovič "Evolution Line"

…Our objective is your desire: more power & torque, uncompromising race looks, significant weight savings Our answer: Akrapovič complete "EVO" system More power and torque Manufactured entirely of high-grade titanium Weight savings: approx. 1 kg Additional resonance body for optimum power delivery Manifold flow optimized for production engine Tuned to comply with the currently valid noise regulations Akrapovič logo sticker on main silencer

POWERPART

1.081,02 EUR

Akrapovič "Racing Line"

…What you want and what we aim for: more power & torque, uncompromising race bike looks, substantial weight savings More power and torque Stainless steel header Silencer outer shell manufactured from high-grade titanium Additional expansion chamber for smooth power delivery Header routing designed for optimum performance with production engine Tuned to comply with current FIM and AMA noise regulations Akrapovič logo sticker on silencer

POWERPART

441,66 EUR

FMF Megabomb header

…

POWERPART

CNC-parts

28,56 EUR

Factory ignition cover plug

…

POWERPART

117,06 EUR

Water pump cover

…

POWERPART

38,40 EUR

Oil pump cover

…

POWERPART

The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that mistakes, printing, setting and typing errors may occur; such information is subject to change without notice. No rights may be derived from incorrect statements.

Europe

North America

Middle East

South America

Asia

Oceania

Africa

KTM 250 SX-F 2020

Engine & Exhaust

Engine

Unrivalled power

Cylinder head

Crankshaft

Crankcases and engine covers

Engine

Skid plate

Clutch slave cylinder protection

Clutch cover protection

Cooling

Effective heat control

Cooling

Water pump cover protection

Radiator protection

Radiator fan

Exhaust

Tuned for power

Exhaust

Akrapovič "Evolution Line"

Akrapovič "Racing Line"

FMF Megabomb header

CNC-parts

Factory ignition cover plug

Water pump cover

Oil pump cover

The Company

Dealer & Service

News & Events

Legal

KTM 250 SX-F 2020

Engine & Exhaust

Engine

Unrivalled power

Cylinder head

Crankshaft

Crankcases and engine covers

Engine

Skid plate

Clutch slave cylinder protection

Clutch cover protection

Cooling

Effective heat control

Cooling

Water pump cover protection

Radiator protection

Radiator fan

Exhaust

Tuned for power

Exhaust

Akrapovič "Evolution Line"

Akrapovič "Racing Line"

FMF Megabomb header

CNC-parts

Factory ignition cover plug

Water pump cover

Oil pump cover

Please choose your bike