We use our own and third party cookies in order to improve your experience and our service. With the aid of cookies we analyze the typical use pattern of visitors to the website. Your continued use of our website shall be conclusively deemed acceptance of the use of cookies. For further information please read our Privacy Policy.
- Exhaust systems (168)
- Brakes (58)
- CNC-parts, anodized (54)
- Chassis/triple clamp(55)
- Footpegs(20)
- Luggage (104)
- Carbon (37)
- Chains/rear sprockets (35)
- Cooling (36)
- Handlebars/instruments/electrics (206)
- Air filter(19)
- Engine (67)
- Navigation(35)
- Wheels (34)
- Lubricants/auxiliary materials(4)
- Protection (165)
- Seats (93)
- Software enhancements(27)
- Tanks(24)
- Trim parts/decals (332)
- Tool/transport (111)
- Windshields(22)
-
X-Bow
(91)
- Covers(3)
- Exhaust gas system(3)
- Accessories(3)
- Aerodynamics(1)
- Controls(3)
- Brake linings(3)
- Brakes(2)
- Brake accessories(1)
- Cockpit(1)
- Cooling(5)
- Electrics(1)
- Extensions(3)
- Driver safety(3)
- Chassis(1)
- Vehicle covers(2)
- Vehicle safety(6)
- Springs(11)
- Rims(5)
- Transmission(1)
- Comfort(1)
- Luggage(4)
- Multimedia(2)
- Performance(5)
- Wheel kinematics(5)
- Wheel accessories(2)
- Tires(7)
- Racing accessories(3)
- Shift mechanism(4)
- Seat(2)
Repair kit
Ref: 00062030058
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated hardening possible by raising the temperature.
Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
Processing: Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved. Use within 2 minutes.
At first, it seems as if there is no adhesion. Just carry on and press the adhesive mixture into the surface. Remove any excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease. Contents: 56 g.
HOMNN
(00062030058) |