FREERIDE 350: THE HIGH FLIER
PIONEERING NEW VEHICLE CONCEPT
RIDEABILITY
Light, manoeuvrable and extremely easy to control. Thanks to an innovative frame concept coupled with the powerful 350 cm³ DOHC four-stroke engine, the Freeride 350 is equipped for the toughest passages and offroad sections. In this model, KTM has united its offroad experience with the demands for an agile vehicle. With indescribable ease, the Freeride also conquers virtually insurmountable obstacles and delivers all the higher a fun factor, the tougher the terrain becomes.
EQUIPMENT
There are plenty of features on the new KTM 350 Freeride that make it stand out from other brands. For example, the prestigious composite frame and the plastic subframe, the high quality, fully adjustable WP suspension combined with machined triple clamps, the variably mounted foot rests, the comfortable hydraulic clutch and, not least, the extra-light, elaborately styled wheels.
WHEELS
The lightweight wheels, featuring CNC-machined hubs and high-end GIANT aluminium rims (18 and 21 inch) with extra-light, orange spoke nipples, are practically unbeatable in terms of weight, although they still guarantee highest levels of stability and safety.
TYRES
Rich in traction and thanks to the high positive proportion in the profile, the trial tyres leave much less of an impression in the ground than conventional enduro competition tyres. The high casing provides appreciably more comfort and benefits the suspension. With the soft and therefore grippy rubber compound, these tyres score highly above all in demanding rocky terrain and riding over roots.
EXHAUST SYSTEM
When designing the exhaust system, engineers focussed their attention on low noise levels and emissions, as well as very rideable, high-torque engine characteristics. Exhaust gases are fed through a central header pipe underneath the engine, protected by the frame and a sturdy under-run plate, to the two aluminium silencers. Each of these is equipped with a catalytic converter, effectively reducing both emissions and riding noise to an environmentally friendly level.
NEW ALUMINIUM/STEEL COMPOSITE FRAME DESIGN
FRAME
A completely new composite frame design made from high quality chrome-molybdenum steel, combined with forged aluminium elements, forms the backbone of the Freeride 350. The front steel frame profiles are combined with the multifunctional aluminium profiles by means of sturdy threaded joints. This revolutionary frame concept is responsible for high levels of tracking stability and safety, as well as minimum weight. A frame geometry selected for high agility with a relatively steep steering head angle and short wheelbase benefits the rider above all in tough terrain.
SUBFRAME
A subframe made from high-strength plastic is bolted to the main frame by means of a stable triangular connection and provides sufficient space for the electronic components of the engine management system. This solution makes a major contribution to the lightweight construction concept of the vehicle.
SLENDER BODYWORK
BODYWORK
The bodywork of the Freeride 350 has been designed completely from scratch. The result is practical ergonomics with unrestricted freedom of movement due to the extremely slim seat and spoiler lines, and bodywork with excellent contact points between rider and machine. Well protected from dirt, grip recesses integrated in the plastic subframe provide an effective hold should the rear wheel ever become stuck in the mud. Furthermore, the front fender and headlight mask are also new designs for the Freeride 350.
SEAT
The long, slender seat ensures unrestricted freedom of movement and a very good level of seating comfort for this operational use. It can be tipped up easily for filling the bike with fuel by means of an intelligent seat locking system. With a seat height of only 895 mm, the Freeride 350 always provides the rider with good ground contact and therefore better riding safety, even in tough terrain.
FUEL TANK
The fuel tank made from transparent plastic lies well protected between the upper frame profiles beneath the seat. The capacity of approx. 5.5 l is sufficient with the economical four-stroke engine featuring fuel injection, even for longer tours. Thanks to the transparent material, the fuel level can easily be made out from the exterior and a low-fuel light positioned between steering head and seat gives an additional indication. An easily accessible and well protected air filter cartridge is housed at the rear of the fuel tank and its height enables a decidedly good wad depth.
HIGH QUALITY WP SUSPENSION
SUSPENSION
The suspension of the Freeride 350 has been specially designed for this vehicle and complies with the high KTM standard. Together with the high quality, CNC-machined triple clamps, a new 43 mm WP upside-down fork with 250 mm suspension travel provides for superb stability, excellent responsiveness and outstanding damping. At the rear, a newly developed PDS shock absorber with 260 mm, linked directly to the swingarm, guarantees maximum suspension comfort and sufficient safety, even on the most demanding terrain. Both rebound and compression stages can be set to suit the rider and the conditions on the suspension components, with high and low-speed compression damping also being adjustable on the shock absorber.
HIGH-TORQUE FOURSTROKE ENGINE
WITH EFI
Based on the successful power unit of the 350 EXC-F, the engine of the Freeride 350 has nevertheless been redesigned for the new vehicle concept. In so doing, the kickstarter has been dispensed with for the benefit of minimal weight and more compact dimensions and a new engine case has been developed in ultra-light, die-cast (instead of sand-cast) aluminium. By redimensioning the exhaust and airbox, the engineers consciously designed the engine for torque rather than race performance in order to retain as effective - i.e. high-traction and power-saving - engine characteristics as possible, above all in tough terrain.
DOHC CYLINDER HEAD
Four steel valves control the charge exchange process, guaranteeing highest levels of durability. They are actuated by means of two overhead camshafts and DLC-coated cam followers. The top engine speed is 10,000 1/min. With a respectable maximum output of 23 hp, the engine produces more than enough power to climb the steepest of slopes with the greatest of ease.
ENGINE MANAGEMENT SYSTEM (EMS)
The engine management system from Keihin with electronic fuel injection and 42 mm throttle body ensures spontaneous, powerful responsiveness and handling, as well as making a significant contribution to the low fuel consumption. Convenient temperature and altitude compensation, and the electronic cold-start enrichment are state of the art. Closed-loop lambda control is a prerequisite for the efficient reduction of exhaust emissions by the two catalytic converters. Additional engine characteristics can be activated with an optional map select switch.
CLUTCH
A smoothly operated clutch with integrated hub damping and effective diaphragm spring makes it possible to keep the whole clutch package extremely compact and light. The clutch is equipped with a wear-free steel basket, 8 steel carrier lining discs and extremely heat-resistant friction linings. These are pre-tensioned by means of a diaphragm spring, substantially reducing the operating force required to pull the clutch. The hydraulic clutch actuation system from Formula was developed especially for the Freeride 350 and guarantees energy-saving and easily controllable modulation.
STARTER
The 350 cm³ engine is activated with an electric starter that is well protected behind the cylinder and ensures reliable starting.
Enduro riding has never been easier. The new KTM Freeride 350 unites extremely easy handling with a low seat height and outstanding ergonomics. Thanks to a minimal weight of only 99.5 kg, the rider is always completely in control, even on the toughest trails, whether it be rough terrain, narrow single tracks or wide gravel roads. The state-of-the-art 350 cm³ DOHC four-stroke engine, newly laid out especially for the Freeride 350 has proven to be the ideal drive unit for this vehicle concept and scores highly in every situation with controllable, torque-oriented performance characteristics.
TECHNICAL DETAILS
ENGINE
| Design | Single-cylinder, 4-stroke, spark-ignition engine, liquid-cooled |
|---|---|
| Displacement | 349.7 cm³ |
| Bore | 88 mm |
| Stroke | 57.5 mm |
| Starting aid | Electric starter |
| Transmission | 6-speed, claw shifted |
| Engine lubrication | Forced oil lubrication with 2 Eaton pumps |
| Primary ratio | 24:73 |
| Secondary gear ratio | 11:48 |
| Cooling system | Liquid cooling system, continuous circulation of cooling liquid with water pump |
| Clutch | Wet multi-disc clutch / Brembo hydraulics |
| Ignition system | Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment |
CHASSIS
| Frame | Perimeter steel-aluminium composite frame |
|---|---|
| Fork | WP Suspension4357 MXMA |
| Shock absorber | WP Suspension 4618 PDS DCC |
| Suspension travel front | 250 mm |
| Suspension travel rear | 260 mm |
| Brake system front | Disc brake with radially mounted four-piston brake caliper |
| Brake system rear | Disc brake with radially mounted dual-piston brake caliper |
| Brake discs - diameter front | 260 mm |
| Brake discs - diameter rear | 210 mm |
| Chain | 5/8 x 1/4” X‑Ring |
| Steering head angle | 67° |
| Wheelbase | 1,428±10 mm |
| Ground clearance (unloaded) | 325 mm |
| Seat height (unloaded) | 895 mm |
| Total fuel tank capacity approx. |
4.8 l Unleaded premium fuel (95 RON) |
| Weight without fuel approx. | 101 kg |
* Ceny majú informatívny charakter a sú uvedené v EUR vrátane 20 % DPH. Zmena cien vyhradená.
